Tri-Oxy REVIVE Instructions

Posted by Eileen Durfee on 7th Apr 2017

Get a high frequency device with both Argon and Neon glass electrodes for sliding and gliding on your skin surfaces. The Tri-Oxy REVIVE  kit includes 7 electrodes for your relaxation!

Once you get your Tri-OxyTM REVIVE we want to make sure that you use the device properly.  Remember to start with only a few minutes at a time.

INSTRUCTIONS:

  1. Insert and remove electrodes when the Tri-OxyTM REVIVE handset is in the OFF position.
  2. Gently push and pull the electrodes while inserting and removing them from the Tri-OxyTM REVIVE hand set, to avoid breakage or shattering of the glass electrodes.  If you twist the electrodes the gas seal may break and render the electrode useless.
  3. Sterilize and clean off any body oils or fluids from the electrodes before use with an alcohol free sanitizer or soap and water. DO NOT USE ANY CLEANER CONTAINING ALCOHOL. Rubbing alcohol is a FIRE HAZARD.
  4. Always start with the handset on the lowest setting, and slowly increase the intensity as you familiarize yourself with the different feelings created by the electrodes in your kit. Not all body parts respond the same, and not all of the electrodes produce the same effect, so care should be taken when using each and every electrode.
  5. Always unplug the Tri-OxyTM REVIVE and store to prevent damage.

 Take a look at the Tri-Oxy REVIVE and the rest of Go Healthy Next's ozone generators!